Brake Fluid Furo DOT 4, 0.910 kg
Vendor code: FR010
Oil type
Range
BRAKE FLUID
Volume
- 0.425
- 0.85
Type of equipment
Safely mixes with other brake fluids
Wide temperature range
Meets all international standards requirements
Effectively combats moisture absorption
Description
DOT-4 brake fluid is designed for use in hydraulic brake and clutch systems of domestic and imported vehicles. It has no adverse effects on brake system components and boasts high thermal stability.
Furo DOT 4 can be safely combined with other DOT 4 and DOT 3 brake fluids, simplifying vehicle maintenance.
Advantages
SAFETY: Very high dry and wet boiling points, corresponding to the maximum temperatures encountered in brake systems, prevent the formation of vapor lock.
STABLE CHARACTERISTICS: The required viscosity value is maintained at both high and low temperatures.
PROTECTION: Provides corrosion protection for brake system components made of various metals: cast iron, aluminum, steel, copper, brass, etc. Does not affect rubber seals and hoses during prolonged contact.
Specifications and permits
Tolerances:
-
FMVSS 116 - DOT 4
- JIS K2233
- SAE J 1703 / J 1704
- ISO 4925
Typicals
Viscosity at 100 °C, mm²/s
<1.5
Viscosity at -40 °C, mm²/s
<1500
Dry fluid boiling point, °C
257
Wet fluid boiling point, °C
158
pH level
7-11.5
Documents
Description
Specifications and permits
Typicals
Documents
DOT-4 brake fluid is designed for use in hydraulic brake and clutch systems of domestic and imported vehicles. It has no adverse effects on brake system components and boasts high thermal stability.
Furo DOT 4 can be safely combined with other DOT 4 and DOT 3 brake fluids, simplifying vehicle maintenance.
Advantages
SAFETY: Very high dry and wet boiling points, corresponding to the maximum temperatures encountered in brake systems, prevent the formation of vapor lock.
STABLE CHARACTERISTICS: The required viscosity value is maintained at both high and low temperatures.
PROTECTION: Provides corrosion protection for brake system components made of various metals: cast iron, aluminum, steel, copper, brass, etc. Does not affect rubber seals and hoses during prolonged contact.
Tolerances:
- FMVSS 116
- DOT 4
- JIS K2233
- SAE J 1703 / J 1704
- ISO 4925
Viscosity at 100 °C, mm²/s
<1.5
Viscosity at -40 °C, mm²/s
<1500
Dry fluid boiling point, °C
257
Wet fluid boiling point, °C
158
pH level
7-11.5
Interested in cooperation with us?
Other Furo products
Connect with us